Bernard Kerr's Pivot Phoenix 29 in detail
Frame: Pivot Phoenix 29, carbon fibre
Fork: Fox Factory 40 29", Grip 2
Damper: Fox Factory Float X2
Headset: Pivot Precision Sealed Cartridge – DH
Rear derailleur: Shimano Saint Shadow
Shifter: Shimano Saint M820
Brakes: Shimano Saint M820 4-piston
Rotors: Shimano XT 6-bolt, 203mm
Crankset: Shimano Saint M820 36t w/ MRP chain guard
Handlebar: Renthal Fatbar 30mm Rise – AluGold
Grips: DMR DeathGrip Flange
Stem: Renthal Integra 50mm
Saddle: WTB Bernard Kerr Team High Tail
Seat post: Phoenix Pro Carbon
Wheels: Reynolds Bernard Kerr Special Edition Blacklabel w/ Industry Nine hub, 29"
Tyres: Maxxis Assegai 29" x 2.5"
Pedals: Crankbrothers Mallet DH
Tomorrow
Screw vertical slats
Gutter splash guard on post #2
Gutter fastener seal
Strength strips
Pans
Nice two hour lunch of sleepy chicken
Screwed in the nine 4" slats on the 20' wall nice and level with the existing white wooden wall
Cut 20' top channel which still needs 1/16" miter
Shortened the vertical slat channels on the street side by 1" to cover the end of the 2x8
Don got the roof panels screwed into the receiver channels from the top and I from the bottom. He caulked some up top
Читать полностью…Rained a bit while eating our burgers. Got back probably around 3:00 and put a third panel on. Then around 4:30 we got greedy and tried a fourth panel and couldn't get it installed.
Читать полностью…Skillet
Electrolytes (pitcher)
Energy bars
coffe cup
I360
Bike wifi stuff: placeholders, usb cable, wall adapter
Money: $500
Speaker?
Phone: USB cable & splitter
towels
Library books back
Took a Winn Dixie break at 1
Ran out of screws on the roof
Installed the gutter splash on post #2
Sealed roof screws
Finished screwing in the vertical slats on the 20' wall by 9:30 save one screw each
Читать полностью…Finished street wall: nine 5" slats, nine 4" slats, single vertical slat, route wiring from fan beam. We need 18 1.5" screws to install it
Bay wall put up with nine 5" slats and top channel
20' wall got top channel installed with 3 screws and two. Two vertical slats tacked to 20' wall
Gutter splash guard on street wall
Don tacked the slat channel up post #2 by launching crooked rockets and introduced a half-inch offset that he seems ok with
Читать полностью…